• You can express various creativities with different colours, image plates and positions.
• Please keep in mind that actions are done quickly before polish on the plate dries.
• Download Instruction Video

step 1	Clean nail with cutex remover, to remove unwanted substances like cream. Then apply base coat, regular polish. Please use Acetone free remover, for gel, acrylic, and silk nails. Please use only Plain Acetone Free Cutex Remover. Those with moisturizing additives and oil contents are not recommended, as the image plate and stamp, now get an oily layer, and this affects the quality of all transfers.
step 2	The base coat/regular polish must be dry before applying the stamping art.
step 3	Apply required nail art colour to relevant image plate. Scrape across the image plate, with the scraper at a 45'' angle, to remove the excess polish. Do not hold in an upright position, ( but at a 45" angle ) as the scaper will not clear all the excess polish, but smear the excess polish all over the image plate.
step 4	QUICKLY , Roll the stamp over the desired image, from right to left, to pick up the design. You need to apply pressure to the stamp, as if you are giving your finger for finger prints. ( He he he... ) You must do this once only. Do not stamp the stamp straight down on the desired image on the image plate., as you cannot pick up the desired picture this way. Just simply roll the stamp over the image once to pick it up on the stamp. Now look at the image on the stamp.
step 5	Now you can simply roll the stamp gently over your nail in the desired direction, with a bit of pressure, onto the desired nail, once only, and lift up the stamp immediately....look..... see....the stamp is clear, and the picture is on your nail.
step 6	For lasting protection, first cover the image with a Konad clear, or glitter top coat, when dry, cover your nail with a clear or glitter top coat. Hold finger nails in cold water for 5 seconds to dry quickly.

• Only Konad special nail polish will transfer images quickly, clearly, and effectively.
• This polish is instantly dry, after the application, and does not smudge/smear.
• The above stamping art works with gel, acrylic, silk nails.

• Use the same procedure to apply designs to other objects.
• Use the special nail polish for stamping art only.
• Use any clear or colour base coat before stamping to fill ridges on natural nails.
• Hand lotion, some of regular pearl polishes and oily nails could make your nails oily and it could be the reason not to make images on the nails. So before you do stamping nail art clean your nails with polish remover.
• If image plate is covered with plastic, remove it.